Little Giant 6-CBM 115-Volt, 1/3 HP, 2760 GPH, Manual (No Switch) Submersible Epoxy Impregnated Cast Bronze Sump Pump for Salty/Briny Water Conditions, 10' Cord, Bronze, 506257

The Little Giant 506257 6-CBM submersible epoxy impregnated cast bronze sump pump is ideally suited for sump systems or water transfer where the water is brackish, salty, or briny such as sump systems where treated water flushes into the sump pit or in areas where brackish water is present. The 6-CBM is equipped with a 1/3 hp 115-volt, shaded pole, oil-filled motor with thermal overload protection and is designed for continuous duty. This pump delivers up to 2760 gph (46 gpm) at 5' lift, has a shut-off of 18' and a maximum psi of 7.0. The6-CBM is equipped with a 1-1/2 FNPT discharge. The maximum fluid temperature is 140 °F. The 6-Series is CSA listed in the USA and Canada.The 6-CBM manual pump is designed for sump systems, emergency water removal or general water transfer. This system does not come with a switch. If used in a sump system, a piggyback switch is sold separately. This pump comes with a 10' cord and a 1-1/4" adapter.SWITCH OPTION TIPS:- Integral diaphragm switches are designed for sump systems only. Minimum basin diameter is 10".- Mid-level integral diaphragm switches cycle more frequently. They are designed for shallow under sink or laundry tub systems. Minimum basin diameter is 10".- Piggyback float switches are designed for sump systems, emergency water removal or water transfer applications. They can be switched to manual mode easily by unplugging the pump from the switch and plugging it directly into the outlet. Float switches require more room to activate the switch, the minimum basin diameter is 18".- Piggyback diaphragm switches are designed for sump systems, emergency water removal or water transfer applications; They can be switched to manual mode easily by unplugging the pump from the switch and plugging it directly into the outlet. The minimum basin diameter is 10".- Manual does not come with a switch; piggyback switches (sold separately) can be added easily.

• MANUAL SUBMERSIBLE PUMP: ideal for sump systems, emergency water removal/transfer of briny/salty water or for sump pumps where water treatment systems empty into the sump pit (switch sold separately)
• BUILT TO LAST: Epoxy impregnated cast bronze motor housing; nylon impeller; propylene volute; Nitrile/carbon/ceramic shaft seal; rated for continuous duty
• CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada
• MANUAL OPERATION: This pump does not come with a switch; piggyback switches can be purchased separately; 1-1/4" FNPT reducer bushing included
• SPECIFICATIONS: 1/3 hp; 115 Volts; 50/60 Hz; 9.0 running Amps; 14.3 starting Amps; 720 Watts; 2760 gph at 5' lift; 18' shut-off; 7.8 PSI; 10' cord; 1.5" FNPT discharge; 140° max fluid temperature